PDA

View Full Version : size of castle nut holding ball joint on rear upper triangle

Noah
January 3rd, 2007, 02:50 PM
The calipers say 1.20 in. or about 30mm. So is that going to be a 1-3/16" or 30/31 mm wrench?
brn24whl
January 3rd, 2007, 03:45 PM
I use a 30mm wrench

Eric
Monkeyboy
January 3rd, 2007, 07:23 PM
Concur, the shiney new one in my hand is 30mm