PDA

View Full Version : Stock Brush Bar - Free to a good home

cgalpin
March 18th, 2007, 12:44 PM
It's off a '94. Slightly tweaked but not bad. Has several spots on the corners that had the plastic coating rubbed off, and also where it bolts to the bumper the coating has cracked and is rusting.

Located in the DC area. Not really interested in trying to ship it.

This picture is a few years old, but it doesn't look appreciably different other than what I mention above.

http://lhsw.com/gallery/d90/DSC00045

charles
shawnpalmer
March 18th, 2007, 02:50 PM
If you do decide to ship, I'd love to have it.
cgalpin
March 18th, 2007, 05:03 PM
Give me a zip. The first step would be to see how much it would cost you. Then I'd need to see how much work it would be to package it decently. I'd rather see it get used than sit in my garage waiting for the odd chance I might find it useful one day (even as scrap metal).

charles
shawnpalmer
March 18th, 2007, 05:58 PM
Zip is 30041. Last time I used ForwardAir and it was an easy deal. I just strapped my bumper to a pallat and dropped it off. Shipping was $120 from Atlanta to Dallas for 245 lbs. If you have a ForwardAir you can call them, they probably won't make you strap it to a pallat. I would be getting it re-powdercoated anyway, so packing it up doesn't have to be perfect. If you contact forwardair, tell them you want to ship it to the Atlanta hub, I will go there and pick it up.
MonLand
March 21st, 2007, 06:41 PM
If this did not work out, I'll take it and replace my totally rusting brush guard until I come up with a better solution (then, I'll give it away again! :) ).
cgalpin
March 22nd, 2007, 11:23 PM
Shawn, I haven't had a chance to look into shipping, but also didn't know Loic needed this. I'll get back to you if he doesn't want it, but I'd rather just take it over to his house next time I'm over to use the welder :)

charles
shawnpalmer
March 23rd, 2007, 10:24 AM
No problem
woldd90
March 23rd, 2007, 11:30 AM
Shawn, one of the guys (Moose) on Solaros is selling one for a few hundred bucks... you could probably negotiate him down and he is local.
shawnpalmer
March 23rd, 2007, 11:48 AM
Thanks Scott, I saw that one. I am looking for an OEM. I have one that needs fresh powdercoating, but it has some water in it because the guy drilled holes for lights in the front of it. So, it is probably going to rust out on me if I do get it re-coated. So, I don't really need one, I just want a better one!