PDA

View Full Version : Need an air intake "trumpet"

shawnpalmer
April 8th, 2007, 07:10 PM
I'm looking for an air intake "trumpet". I cut my original one when I installed the raised air intake and would like to find another one in case I want to take it back to stock one day. It is the peice that clips on the air filter housing that resembles a trumpet.
huck1974
April 8th, 2007, 08:12 PM
I'll give you mine but it will be a month or so before I'm done with it. You can just have it for shipping price.
shawnpalmer
April 8th, 2007, 08:25 PM
That would be great, I really appreciate that.
huck1974
April 8th, 2007, 08:31 PM
no problem. remind me in a month or so.
Gore Ranger
April 8th, 2007, 09:58 PM
aren't they the same as the RRC one? If so, get one from Will Tillery in virginia
Paul Grant
April 10th, 2007, 11:41 AM
They have different ports depending on the engine. I have at least seven or eight taken from a variety of engines. They are $20 each. If you send me a photo of yours I can match it up to what I have. Let me know if I can be of help.
Cheers.
Paul

paulgrant@mac.com
shawnpalmer
April 11th, 2007, 10:11 PM
I PM'd Will Tillery, but no response yet. I can snap a pic in a day or two of one on a 4.0. There should not be a difference between 97 D90 4.0's, should there? The one I have is cut, so that won't do you any good. I can take a picture of the one on my 2nd truck for you.
Paul Grant
April 12th, 2007, 09:53 AM
THe 4.0L should have two lines running from the right (passenger) side. One towards the front and one towards the back with a boss for a third port in the center. The left side also has two similar ports towards the front and back. If this is what your trumpet assembly looks like I have one I can send you. If not, descibe what you have, I'm sure I have it.
shawnpalmer
October 19th, 2007, 11:23 AM
I still need one of these. The part I need is the part that you take off to the change the air filter. It clips onto the round cannister that the filter is in. It looks like a horn.

http://i115.photobucket.com/albums/n312/shawnpalmer/horn.jpg
Paul Grant
October 19th, 2007, 02:04 PM
Disregard my earlier posts because I was under the impression you were talking about the lower plenum trumpets.
What you are looking for is the horn off the air cleaner assembly of a Range Rover Classic. If that is the case, I have a horn that could benefit from painting but is structurally sound. $20 shipped.