PDA

View Full Version : TD5 speedometer install help

FlaD90
April 2nd, 2008, 11:29 AM
Guys,


I have got my hands on a Td5 speedometer and & gauge panel with the wiring harness still attached, I also have got some schematics on the pin-outs for the connector.

I have a 94 D90 ST, what I need is a schematic of the pin-out for this truck or If someone has done this before then even better if they can point me in the right direction.

As an added bonuse I also have the "black out LED indicator panel" as seen in ECR's website, man if I can also get this working it would be great,...

I have a detail pictures attached:
http://i210.photobucket.com/albums/bb242/imperadeiro/C1060.jpg


and


http://i210.photobucket.com/albums/bb242/imperadeiro/Speedometer-back.jpg


Well this is what I have so far, any help would be great.
diesel_jim
April 19th, 2008, 03:24 PM
There has been a good bit on a similar thread here in the UK on LR4x4.







for the speedo install, you want the wibbly wobbly speedo thread (http://forums.lr4x4.com/index.php?showtopic=14892) which covers the speedo and later on, some of the warning light binnacle wiring.

Also attached is (should be!) a .zip .xls spreadsheet with the wiring pin-outs for the later Td5 type dash.
FlaD90
April 21st, 2008, 07:30 AM
Thank you very much "diesel_jim" ..I will work on this project now.

All the best
Tom
diesel_jim
April 23rd, 2008, 07:25 AM
No problem.


Shout if you need any tech help on it, although most of the info is there in that link.

Jamie.
JimC
April 23rd, 2008, 12:43 PM
DJ - there are pix of your build at lr4x4 but nothing good here. I recommend you fix this problem by posting lots of pix here. Otherwise, I will be forced to use another site to view sufficient roverpr0n and that would require extra clicking.
diesel_jim
April 26th, 2008, 07:13 AM
DJ - there are pix of your build at lr4x4 but nothing good here. I recommend you fix this problem by posting lots of pix here. Otherwise, I will be forced to use another site to view sufficient roverpr0n and that would require extra clicking.


LOL!!!

OK, i'll get some fresh piccies up on here. actually, not much has changed in the last month. the weather has been crap here (UK) and as i'm building it out on the drive, i'm quite weatehr dependant.


anyway, i'll get it updated ASAP sir! :grin
FlaD90
April 27th, 2008, 03:47 PM
AHHHH your the best man..