Badger Gutter Rail Kit

[TDI Guy]

Can someone take a picture of how the badger gutter rail kit attaches to the rear bed are behind the door? It would be greatly appreciated.

Randy :grin

[chrisvonc]

There is one nut & bolt at the bottom. I might have a pic at home.

[roverx]

Hey Randy,

You have a UK tub correct? If so, you may need to install a rivnut into the capping for it to fit correctly. The set up is very similar to a series rover. You probably have a hole in the capping to bolt the foot of the upright too? If you don't get a picture, I can always run down to Badgers place and take a few shots of his jig for you. Chris is a good friend and his shop is about 5 min from my house. Just let me know.

[TDI Guy]

Thanks Scott, I do have a euro tub but I jam in the process of totally modifying it to have no rear bulkhead and a NAS cage inside to support it. I will take pics. Today I modified one of the cappings with a grinder and some nice torch work. It now looks like a NAS piece of capping in the front. I still have a few small welds to do though.
Thanks Chris let me know on the pics, if not, I will give you a call Scott.

Randy