PDA

View Full Version : Rockware bumper Warn 8274 combo

KevinNY
July 2nd, 2008, 09:52 PM
Rockware bumper set up for a Warn 8274 Winch, recently stripped, hot dip galvanized, hand sanded and powder coated. Will last forever now. Warn 8274 fully rebuilt, replaced freespool clutch, brake service kit, lower housing seal kit, motor rebuilt and repainted by my reliable auto electric shop as well as all new welding cables for power. Hawse included. Located in Albany, NY. $1300 for the package.
rovertrader
July 3rd, 2008, 06:33 AM
includes the rope and controller I assume?
KevinNY
July 3rd, 2008, 08:28 AM
Yes controller is included, rope is 75 feet of 5/16 amsteel if you want it. I didn't list it as I figured many would want to choose their own line and might not trust a used one.
KevinNY
July 20th, 2008, 11:00 AM
Bump
$1100
rovertrader
July 20th, 2008, 07:17 PM
How much for shipping to 28103? Thanks- better to pm
KevinNY
July 22nd, 2009, 01:34 PM
Gonna bump this back up with a price of $1200 again. I have since last posting upgraded the winch to the new style solenoid pack and controller.
evilfij
July 22nd, 2009, 04:12 PM
Is this a D90 bumper?
KevinNY
July 22nd, 2009, 05:48 PM
Yes.

Follow-up Post:

Another recent pic or two.
e90miller
July 22nd, 2009, 06:29 PM
pm'd you!
Oxcart13
July 22nd, 2009, 10:58 PM
Kevin - I have the same set-up on my 110. I noticed you have some metal removed from the area between the upper bolts. Improved airflow?

Good luck on the sale - that's a great set-up for an even better price.

Mark
KevinNY
July 22nd, 2009, 11:08 PM
Thats the way it came and I would assume it is so you can see the line on the drum.
cellulararrest
July 23rd, 2009, 09:53 AM
I'm pretty sure I asked you before, but this would take cutting of a 90's grill, correct?
KevinNY
July 23rd, 2009, 10:04 AM
Yes, I believe some grill trimming may be required. I don't want to sell it someone without them knowing that. Of course on a series front end it is no issue.
KevinNY
July 23rd, 2009, 12:29 PM
Sale Pending
KevinNY
July 23rd, 2009, 09:54 PM
Spoke to Rockware today and found out that it does NOT require cutting the grill. They extend the mounting plates and then increase the angles where the blade bends back for the same clearance on the wings.
Oxcart13
July 23rd, 2009, 10:34 PM
FWIW - I can also confirm that no cutting is required. The Rockware bumper on my 110 did not require cutting for the 110 or the 90 it was on previously. Mark