PDA

View Full Version : Warn 12K $300

madcowdungbeetle
July 3rd, 2008, 09:08 PM
I planned on rebuilding this winch, pulling the drum, and turning it down on a lathe and rewelding it as a narrowed 12K, but as usual I took on more projects, and this one fell by the way side.

This winch needs a good going over, probably a total rebuild, as it has seen some use. New solenoids and some wiring is a definite. The housing has seen some wear, as it was used with out a fairlead. I don't have a remote for this winch, but that should be easy to come by on eBay I'd imagine.

All super easy stuff if you don't mind getting dirty, and Warn's customer support has always been great in my experience.

Prefer to sell to a local, so I don't have to ship the heavy bastard, but if you pay the shipping I won't complain.

Pics are attached.

Thanks!
pendy
July 3rd, 2008, 11:06 PM
Doug Crowther wants this winch. I am sure he will take it.
woldd90
July 4th, 2008, 11:27 AM
I may want it too...
madcowdungbeetle
July 5th, 2008, 01:55 PM
C'mon now Scott, you know you want it.... and I could've already had it to you by now...
130Tdi
July 6th, 2008, 11:25 PM
Jon,

How long is it ? Wondering if it will fit the winch bumpers I have, ARB and Rock Ware.
madcowdungbeetle
July 7th, 2008, 12:40 AM
Jon,

How long is it ? Wondering if it will fit the winch bumpers I have, ARB and Rock Ware.I'll measure it tommorrow when I get home from work. You can probably pull the dimensions off of Warns website. They used to post dimensions on there.

I have it feeling it will fit the Warn without much issue, not sure about the Rock Ware though
cgalpin
July 7th, 2008, 11:07 AM
Jon, where is CLT, NC?
Abrooks
July 7th, 2008, 11:11 AM
Doug, my 10K was on that ARB you have and I believe (you'd best check) that the 10K and 12K share the same body, they just have different gearing.
madcowdungbeetle
July 7th, 2008, 11:45 AM
Jon, where is CLT, NC?Charlotte
130Tdi
July 7th, 2008, 11:49 AM
If I go 12k, I want to keep that for my 110 on the Rock Ware. I'll then let the just rebuilt 8k go with the 110 pickup that I have for sale. I'll check Warns site later today if time allows-hate Mondays
madcowdungbeetle
July 7th, 2008, 12:06 PM
From Warn's Site:

Winch Dimensions: 24.37" L. x 8.45" D. x 11" H.
(6.19mm L. x 214.63mm D. x 279mm H.)

Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)
cgalpin
July 7th, 2008, 02:07 PM
Charlotte
I'll be heading north from Charlotte, SC later this week, and was considering offering to pick it up for Doug on the way, but it's a bit far west.
madcowdungbeetle
July 9th, 2008, 03:03 PM
Winch is SOLD.