Offer to the group

Hey guys (gals),
I am starting to see disco 1s (up through 1995) and classics coming through the U-pull it yards. I am not sure of what people need but I can pull MAF Sensors off of these vehicles if anyone needs them provided they are still on the vehicle when I get to the yard. So if anybody has an interest in a spare used MAF and or an ECU to fit their 94 & 95s I can keep my eyes open. The MAFs cost me about $40 and the ECUs about $70 (this is cost not any reimbursement for my time as I am not looking for any).
Clay

Ill take a MAF for a 3.9 and 4.2 and respective ECU's. I would also be interested in injectors for a 3.9

I could use some rear seat belts (just the top male portions) for my '97 D90 -- apparently, I hear the D1 rear belts work without any mods. Let me know...

Heston if you can confirm what year D1s will work I can keep my eyes open and grab a set next time I am passing through the junk yard.

The rear seat belts do need a mod. Search the forums, but you'll find they are too short and thus will lock in the retracted position. I had to make a small extension to lower the shoulder mount/guide to get them to work on my D90.

hth
charles

I am looking for a MAF sensor for my 97 D-90 4.0. I checked Ecology last week and they don't have a a Rover in the place.
Thanks
Andrew

Andrew,
I will keep looking. there are about 8 u pull its in L.A. and one can make the round to hit all of them in a day. If you want to take a trip up there one of these weekend, I think I can get a pass from the Ms's (just PM me) . Also you may want to check the Primo Yard at the Pick your parts right on Energy way or...... just ask one of the Brown field yards to call around as they are all on short wave so you may end up paying a little bit more but it will be pulled for you. Also, you can call Trolley Auto Parts and see what they have (used European salvage yard).
Clay

Keep in mind the used rover parts market is pretty flush with parts as the prices on used trucks are down. Places like roverguy, lucky8llc and paul grant are parting out trucks all the time.

Ron

O.k. Andrew if you can't find it at our local u-pull its on you own, Ron has some suggestions

Ok, thanks guys will give them a try and post my success.
I looked into a refurbished MAF sensor at Inland Rovers, but it was still $600 with no guarantee or warranty

Call roverguy and get one off a 96-99 disco I.