View Full Version : In for Service
wicks
April 14th, 2004, 09:43 PM
Took the 90 and my brother's 95 LWB down to Inland Rovers today for 60 service, and several specific investigations/projects. First impressions are they're very competent guys.
Anyone have experience with T-box leaks? Mine drips a few drops a night.
Mike Hippert
April 14th, 2004, 09:46 PM
Anyone have experience with T-box leaks?
Yes! I bet its dripping from the output seal. If it is pull the Drum break off and tighten the big nut, or you may need to replace the seal.
wicks
April 14th, 2004, 11:44 PM
One doesn't have to remove the T-box to do that? And the BIG NUT can be tightened to just press the output seal tighter (to seal again) kinda thing?
Mike Hippert
April 15th, 2004, 09:11 AM
No you don't have to remove the box , just take off the rear driveshaft, and the break. And yes by tightening the big nut you are pressing on the seal to seal it back up. When it happened to me the nut worked its way loose.
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.