FS Lots of Defender Stuff!

[Stmpede]

RF matte eyebrow (JimC has first shot at this one as per a previous discussion) $100

Upper OEM Swingaway Tire Carrier Bracket/Hinge (NIB, RN gets $133.18 for this) $100

D90 Stainless Chassis Bolt Set (Brand New, includes tub to cross-member kit) $50

Carpet Frt. Floor Mats (fleabus has first shot at these) $30
-Rt. one is in great shape, Left is good, but the edging is coming apart, includes additional sound
deadening that is installed underneath.

Rubber Frt. Floor Mats $20
-Some damage to the edges, but certainly beats $90 for new ones

Single Driver Side heavy rubber insulated floor mat -$10
-Very Good Condition

5-bar front floor panels $150
-Painted with black truck bedliner to give more grip. Some chips in the bedliner near the edges, but
can either be stripped off to bare aluminum or touched up with a can from NAPA

OEM D110 Interior Dome Light (Brand New in Box, RN gets $88.34 for this) $50

Chevy Dome/Map Light (I had planned to mount this in my 110 but changed my mind) $15

Chrysler Dome Light (Same idea as above) $10

5.25" speaker spacers (Creates additional clearance for speaker magnets, NIB) $10

Orig. Center Console from my 110 (Includes OEM Radio in unknown but believe working cond.) $75
-Not perfect, but pretty good shape, certainly far better than the majority out there

D110 OEM Amp for radio (Same cond. as above) $25

OEM Bumper & POE 110 Winch Mount Bracket $400
-Bumper has not been installed since it was repainted (no turn signal style bumper)
-Bracket was also stripped and repainted, has also been modified to accept X9 Superwinch, but orig
designed to mount a WARN 8000

Taylor 8mm plug wires $25
-Installed for about 5 miles, perfect cond. coil wire included, but does not fit stock setup)

Cap & Rotor (Napa, not the junk LR one) $35
-Installed for about 5 miles, perfect cond. Cost app. $60+ at NAPA

Right side Headlamp Finisher (NIB, RN gets $44.25 for this) $25

D90 OEM Galvanized Rocker Panels (C channel, not the sills, NIB) $150 for the pair

Rear Corner bracket for tub (Series & Defender, Galvanized) $2

Rear License plate light spacer (NIB) $5

OEM D110 Auto Dimming Rearview Mirror $40
-Includes long pigtail with proper connector and orig. wire shield to hide the wire coming down from the
headliner.

American Dirt Roads Light Panel that fits in the dash recess where the clock is in a D90 (Custom made for me by Len) $30
-Has mounting holes to fit two factory cigarette lighters (also included), heated seat switches, and
rocker switch to turn light on and off (included).

Factory D110 Springs -$100
-Good condition, truck was not sagging or anything, just replaced to go to OME HD's


Thats all for now. haha. Pictures to follow tomorrow. Prices do not include shipping.

Lick away folks!

[JimC]

Yeah, I'll take that fender flare.

[JRW]

Andrew,

I'll take the following:
D90 Stainless Chassis Bolt Set (Brand New, includes tub to cross-member kit) $50
Single Driver Side heavy rubber insulated floor mat -$10 (If it will fit a D90)
Rear License plate light spacer (NIB) $5 (If it will fit a D90)

Please confirm those last two will fit a 90. Shipping will be to 75022.

Thanks!

[tomaco1]

American Dirt Roads Light Panel that fits in the dash recess where the clock is in a D90 (Custom made for me by Len) $30
5.25" speaker spacers (Creates additional clearance for speaker magnets, NIB) $10
Intersted in both
I'll take spacers if there are for the dash
light panel pending pics
Thanks

[GYM]

2nd in line for the single driver side heavy rubber insulated floor mat...

[fleabus]

I'll take the carpeted floor mats... PM sent.

-Dan

[Stmpede]

Jim - Same deal as last time? If so, shoot it to me in a PM again, I think I deleted the one with your address and Fedex info.

John - Yes, both will fit a D90. In fact, I believe the mat came from a 90.

Tom - I'm not sure if the spacers fit a D90 dash or not. I bought them for the dash on my 110 to clear the heater flap, but then realized the dash speakers in my truck are only 4". These will fit the back, door if you mount speakers there, or possibly your dash, but I can't say. You'll have to measure your speaker. Pics are on the way!

[woldd90]

I will take the Auto Dimming mirror.

[rayfi]

What rear corner bracket do you have? NAS? Please sens a picture dmoeller@marseefoods.com

[Stmpede]

You changed pic sizes on me again...You're killin' me smalls!

Console also includes a new striker for the latch (not pictured) Latch and key should be swapped from your old one. The lock barrel is missing from this latch.

Rubber mat has a small crack (about 1") right where it bends to go up the firewall. I couldn't see it orig. because it sort of disappears when the mat is in its normal shape, only shows up when it is laying completely flat, but still overall pretty good shape for $10.

Carpet mats and 5 Bar both show some dust spots in the pic (in the air between the camera and the item that the flash picked up but are just in the pics). Carpet needs to be vacuumed but is in good shape otherwise.

[NashvilleRover]

OEM 110 Dome light licked and paid for!
Thanks
Dendy

[Stmpede]

Oops, sorry this one didn't upload the first time, here it is though...

[tomaco1]

Dirt Road picture?
Thanks

[BEIS]

Can you put up a picture of the OEM Bumper & POE 110 Winch Mount Bracket ? Thanks buddy.

[galen216]

What is the part # on the NAPA cap and rotor? I assume it is the same for an '94 RRC, if so I'll take it.

[Stmpede]

Ryan, Pics coming, camera is charging as we speak.

Galen, EP71(rotor) and EP78(cap)

Follow-up Post:

Here are the pics of the bumper and winch mount. The white on the bumper is just dust.

[vesparover]

I'll take the thingh len made you- take paypal?
brian bertolini
deweyberts@yahoo.com

[Stmpede]

RF matte eyebrow (JimC has first shot at this one as per a previous discussion) $100 SOLD

Upper OEM Swingaway Tire Carrier Bracket/Hinge (NIB, RN gets $133.18 for this) $100

D90 Stainless Chassis Bolt Set (Brand New, includes tub to cross-member kit) $50 SOLD

Carpet Frt. Floor Mats (fleabus has first shot at these) $30 SOLD
-Rt. one is in great shape, Left is good, but the edging is coming apart, includes additional sound
deadening that is installed underneath.

Rubber Frt. Floor Mats $20
-Some damage to the edges, but certainly beats $90 for new ones

Single Driver Side heavy rubber insulated floor mat -$10 SOLD
-Very Good Condition

5-bar front floor panels $150
-Painted with black truck bedliner to give more grip. Some chips in the bedliner near the edges, but
can either be stripped off to bare aluminum or touched up with a can from NAPA

OEM D110 Interior Dome Light (Brand New in Box, RN gets $88.34 for this) $50 SOLD

Chevy Dome/Map Light (I had planned to mount this in my 110 but changed my mind) $15

Chrysler Dome Light (Same idea as above) $10

5.25" speaker spacers (Creates additional clearance for speaker magnets, NIB) $10

Orig. Center Console from my 110 (Includes OEM Radio in unknown but believe working cond.) $75
-Not perfect, but pretty good shape, certainly far better than the majority out there

D110 OEM Amp for radio (Same cond. as above) $25

OEM Bumper & POE 110 Winch Mount Bracket $400
-Bumper has not been installed since it was repainted (no turn signal style bumper)
-Bracket was also stripped and repainted, has also been modified to accept X9 Superwinch, but orig
designed to mount a WARN 8000

Taylor 8mm plug wires $25
-Installed for about 5 miles, perfect cond. coil wire included, but does not fit stock setup)

Cap & Rotor (Napa, not the junk LR one) $35
-Installed for about 5 miles, perfect cond. Cost app. $60+ at NAPA

Right side Headlamp Finisher (NIB, RN gets $44.25 for this) $25

D90 OEM Galvanized Rocker Panels (C channel, not the sills, NIB) $150 for the pair

Rear Corner bracket for tub (Series & Defender, Galvanized) $2

Rear License plate light spacer (NIB) $5 SOLD

OEM D110 Auto Dimming Rearview Mirror $40 SOLD
-Includes long pigtail with proper connector and orig. wire shield to hide the wire coming down from the
headliner.

American Dirt Roads Light Panel that fits in the dash recess where the clock is in a D90 (Custom made for me by Len) $30
-Has mounting holes to fit two factory cigarette lighters (also included), heated seat switches, and
rocker switch to turn light on and off (included).

Factory D110 Springs -$100
-Good condition, truck was not sagging or anything, just replaced to go to OME HD's

Follow-up Post:

Forgot to mention, everything that has been paid for was shipped today, so you should all receive your new treasures within a few days!

[vesparover]

Hi, is there a line for the american dirtroads part?
I'll paypal you now.
Brian

[Stmpede]

Yeah, you are second. I need to get a picture for Tom, but my camera is acting up, if it doesn't start syncing with my computer soon I am going to borrow a friend's when he gets home.

[tomaco1]

Thanks for remembering me!
Vespa, if I take it, I'll be selling the DRoad light for the same spot.

[burkjackson]

I'll take the Swingaway Tire Carrier Bracket/Hinge and the speaker spacers.
Send me a PM and i'll send you my info.

[Stmpede]

Ok, here is what is left.


Upper OEM Swingaway Tire Carrier Bracket/Hinge (NIB, RN gets $133.18 for this) $100

Rubber Frt. Floor Mats $20
-Some damage to the edges, but certainly beats $90 for new ones

5-bar front floor panels $150
-Painted with black truck bedliner to give more grip. Some chips in the bedliner near the edges, but
can either be stripped off to bare aluminum or touched up with a can from NAPA

GM Dome/Map Light (I had planned to mount this in my 110 but changed my mind) $15

Chrysler Dome Light (Same idea as above) $10

Orig. Center Console from my 110 (Includes OEM Radio in unknown but believe working cond.) $75
-Not perfect, but pretty good shape, certainly far better than the majority out there

D110 OEM Amp for radio (Same cond. as above) $25

OEM Bumper & POE 110 Winch Mount Bracket $400
-Bumper has not been installed since it was repainted (no turn signal style bumper)
-Bracket was also stripped and repainted, has also been modified to accept X9 Superwinch, but orig
designed to mount a WARN 8000

Taylor 8mm plug wires $25
-Installed for about 5 miles, perfect cond. coil wire included, but does not fit stock setup)

Cap & Rotor (Napa, not the junk LR one) $35
-Installed for about 5 miles, perfect cond. Cost app. $60+ at NAPA

Right side Headlamp Finisher (NIB, RN gets $44.25 for this) $25

D90 OEM Galvanized Rocker Panels (C channel, not the sills, NIB) $150 for the pair

Rear Corner bracket for tub (Series & Defender, Galvanized) $2

American Dirt Roads Light Panel that fits in the dash recess where the clock is in a D90 (Custom made for me by Len) $30
-Has mounting holes to fit two factory cigarette lighters (also included), heated seat switches, and
rocker switch to turn light on and off (included).

Factory D110 Springs -$100
-Good condition, truck was not sagging or anything, just replaced to go to OME HD's


Make offers on anything you would like. I need to move this stuff as it is taking up precious space here at home!

Tom, here are the pictures I promised of the light panel. As I mentioned, the heated seat switches are not included, I just popped them in for the picture. Everything else you see IS included though.

[vesparover]

So. if the cig lighter is still available- I will paypal you now for it.
Brian Bertolini

[Stmpede]

Brian, you are second in line behind Tom, but he licked it first pending a picture which I just finally got a chance to take and post. I will definitely let you know as soon as I hear one way or another from him.

[tomaco1]

Thanks Andrew,
Brian, your in luck, I have to pass, I need a place for the clock! I thought it had a clock hole.

[BEIS]

I'll buy the thing if Brian passes! hah

[Stmpede]

Bump - BTW, the console comes with two keys.

[vesparover]

Hi Andrew, I was thinking the seat switches came with it. Do you have them and how much for them? Thanks
Brian

[Stmpede]

Brian, I have them, but I need them for my heated seat kit. They came with my kit, and should come with yours too. Otherwise, you will have to measure the holes to find the right size, but you should be able to find matching switches at one of these places.

http://www.mouser.com/home.aspx
http://www.e-switch.com/
http://www.newark.com/
https://www.europaspares.com/ELECTRICAL/

[Happyxhour]

Cap & Rotor (Napa, not the junk LR one) $35
-Installed for about 5 miles, perfect cond. Cost app. $60+ at NAPA


Interested in seconds on the NAPA cap and rotors. These are for 94 D90 correct? Only question is are the OEM really crap? Just talked to my Phillippe at Roverland and he is saying need to go with OEM which would put me over 100+. Feedback? Or is it your mile may vary thang?

Robert

[Stmpede]

I think the factory caps are fine, but there was a (1, 2, 3, ????) batch(s) of bad rotors and I think some are still on the shelves at dealers. I believe these are the same for the '94. They're yours if you want them, he never got back to me after posting the part number. PM me your shipping info and I'll get you a total.

[Stmpede]

Although this bumper, winch mount and center console has been quite the conversation starter sitting in my living room for the last few weeks, I feel it is high time I pass these on to the next proud owner.

Make offers, the bumper has been repainted and looks excellent sitting here, but would look even better attached to the front of the new owner's rig!

These need to go ASAP! No reasonable offer refused for anything!

[NashvilleRover]

Andrew:
Can you PM me or e-mail me re: the Center Console? Just wondering what you mean by "not perfect."
And ... since I own a 110, it would be nice to have a back up console, just wondering how bad you want to move it?

Thanks
Dendy

[Stmpede]

Upper OEM Swingaway Tire Carrier Bracket/Hinge (NIB, RN gets $133.18 for this) NOW $65

Chevy Dome/Map Light (I had planned to mount this in my 110 but changed my mind) NOW $10

Chrysler Dome Light (Same idea as above) $10

Orig. Center Console from my 110 (Includes OEM Radio in unknown but believe working cond.) NOW $65
-Not perfect, but pretty good shape, certainly far better than the majority out there

D110 OEM Amp for radio (Same cond. as above) OFFERS

OEM Bumper & POE 110 Winch Mount Bracket OFFERS
-Bumper has not been installed since it was repainted (no turn signal style bumper)
-Bracket was also stripped and repainted, has also been modified to accept X9 Superwinch, but orig
designed to mount a WARN 8000

Cap & Rotor (Napa, not the junk LR one) $35
-Installed for about 5 miles, perfect cond. Cost app. $60+ at NAPA

Right side Headlamp Finisher (NIB, RN gets $44.25 for this) $25

D90 OEM Galvanized Rocker Panels (C channel, not the sills, NIB) NOW $125 for the pair

Rear Corner bracket for tub (Series & Defender, Galvanized) $2

Factory D110 Springs - OFFERS
-Good condition, truck was not sagging or anything, just replaced to go to OME HD's

Everything else has been sold. I reduced several prices, but feel free to make offers on anything. I need to make room around here!

Thank you!

[Stmpede]

Bump