View Full Version : Parting out a 96 D1
draaronr
November 17th, 2008, 08:22 PM
Let me know if you need anything. draaronr@aol.com or pm is fine.
CDeWan
November 18th, 2008, 02:29 PM
aaron,
Someone PM about an ECU for a 97 D-90. Do you know if the ECU out of a 96 D-1 will swap into a 97 D-90 as I believe they are both OBD II
draaronr
November 18th, 2008, 05:02 PM
aaron,
Someone PM about an ECU for a 97 D-90. Do you know if the ECU out of a 96 D-1 will swap into a 97 D-90 as I believe they are both OBD II
I am pretty sure it will, but you will probably have to change the chips out. I can ship it out to you for $200 if you want it.
paypal is draaronr@aol.com
jorge
November 18th, 2008, 05:08 PM
Are the Mass air flow sensors the same for 4.0 97 D-90 and the 4.0 Disco Gems ? If so I need one for my 97 -D-90 .
draaronr
November 18th, 2008, 05:15 PM
yes they are the same. $250 to your door. paypal is draaronr@aol.com
bbell
November 20th, 2008, 08:07 AM
Thanks for looking out for me CdeWan, I am looking for the ECU for my 97 D-90, I will check with the dealer today and see if thinks it will work, if so yes I want it.
draaronr
November 20th, 2008, 08:24 AM
Thanks for looking out for me CdeWan, I am looking for the ECU for my 97 D-90, I will check with the dealer today and see if thinks it will work, if so yes I want it.
just let me know. the 97s ecu is similar that is why they have that annoying rough road sensor that trips to bypass the lack of abs. From what I found a chip would more than likely need to be swapped, but there is a write up on here that makes it appear pretty straight forward. Let me know what you dealer says.
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.