FS - More Defender Parts/Accessories

[Stmpede]

Ok, I still have some of the previous stuff, which can be found in this thread. (http://www.d-90.com/forum/showthread.php?t=17658&highlight=fs+lots+defender) Please make offers on any of that stuff. The worst I can say is no, but I need to move this stuff. Also, may be interested in trades for other parts. Let me hear what you've got...

Additionally, I have

A couple (2) fuel gauges available. $25/ea

Temp Gauge AMR2631 (the D90 one used to replace the 110 one). It has a small mark in the lens to the left of the temp symbol, but below the actual needle/gauge part. You should be able to see it in the pic. $25

NAS D110 Temp Gauge $10

KPH Speedo $10

Fog Light Switch. This is a rocker to fit the wiper motor cover and give a more factory appearance to your light install. This switch is brand new, and has never been installed. $20

Genuine Light Bar. This is the bar that mounts to the front bumper/brush guard to mount two lights in front of the grille. It has some very minor bubbling near one end, but you can barely even see it. I tried to take pics of it, but it is hard to even get it to show up in pics. $50

Wiper Cable and Gearboxes. Used but in good working condition. $20/complete set

Both pictures are of the same AMR2631 Temp Gauge. As you can see in the pic with the fuel gauge, the mark in the lens is not too bad. The D110 Gauge looks identical, but the lens is in great shape.

[woldd90]

I am interested in the light bar... I will send you an email about this and the floor pans stuff.

Scott

[Ren Ching]

does the wiper cable gearbox stuff come with the connecting pipes? if so I'll take it.
rgrds
dave

Ok, I still have some of the previous stuff, which can be found in this thread. (http://www.d-90.com/forum/showthread.php?t=17658&highlight=fs+lots+defender) Please make offers on any of that stuff. The worst I can say is no, but I need to move this stuff. Also, may be interested in trades for other parts. Let me hear what you've got...

Additionally, I have

A couple (2) fuel gauges available. $25/ea

Temp Gauge AMR2631 (the D90 one used to replace the 110 one). It has a small mark in the lens to the left of the temp symbol, but below the actual needle/gauge part. You should be able to see it in the pic. $25

NAS D110 Temp Gauge $10

KPH Speedo $10

Fog Light Switch. This is a rocker to fit the wiper motor cover and give a more factory appearance to your light install. This switch is brand new, and has never been installed. $20

Genuine Light Bar. This is the bar that mounts to the front bumper/brush guard to mount two lights in front of the grille. It has some very minor bubbling near one end, but you can barely even see it. I tried to take pics of it, but it is hard to even get it to show up in pics. $50

Wiper Cable and Gearboxes. Used but in good working condition. $20/complete set

Both pictures are of the same AMR2631 Temp Gauge. As you can see in the pic with the fuel gauge, the mark in the lens is not too bad. The D110 Gauge looks identical, but the lens is in great shape.

[TravelerBT]

so what is the deal with replacing a speedometer? Would I need to take that to a shop so they can set the mileage? Or can I legally do that myself?

[Stmpede]

No, you reuse the pipes, it is just the cable that slides into the pipe and the two gear boxes.

[NashvilleRover]

Andrew:
If Scott backs out on the light bar, I am interested.
Thanks
Dendy

[Ren Ching]

10-4. I think I need the pipes for a RH to LHD conversion. pretty sure I can figure something out.

Thanks!
D

No, you reuse the pipes, it is just the cable that slides into the pipe and the two gear boxes.

[matt L.]

Andrew:
Interested in light bar and light switch. PM sent
Thanks, Matt

[moose]

PM sent on the speedo.

Brett

[Stmpede]

Not sure about legality, but if you advance it to the correct mileage, you haven't done anything wrong, and who would know anyway right?

Follow-up Post:

DB, I don't see why, the one closest to the motor is the only one that I think even differs, but you could probably modify it yourself to fit the other side.

[Stmpede]

Bump

Speedo Sold
Light Bar Sold
Switch is pending payment

Gauges still available if anyone needs one...especially good for any of you adding another fuel tank so that you can have matching gauges.

[Stmpede]

bump, still available. Feel free to make offers. Also, I still have the front bumper and winch mount available. Bumper is perfect, just repainted. Mount is the orig. POE mount off NAS 110 and was modified to accomodate the x9 as well as the warn 8000.

Follow-up Post:

Forgot to mention. I also have a block heater (brand new, never installed) and receptacle for mounting the plug. I will get a picture later today, but both are brand new. My plan was to mount the receptacle so that you could plug in the cord without opening the hood, or having a plug dangling out of the grill or something. I found a couple stock photos, will take pics of the actual items tonight if need be.

How about $100 shipped to the 48 for both?