PDA

View Full Version : AC Install

aosias
January 28th, 2009, 09:50 PM
I am getting a used AC system for my 95 ST. I was wondering if anyone had any installation instructions. I was hoping to do some of the install myself and then have a shop finish it and charge the system.

Alex
aosias
February 10th, 2009, 03:08 PM
Does anyone happen to have the install instructions for an ac system? It's a 94 system into a 95 ST.

Thanks,
Alex
JimC
February 10th, 2009, 03:12 PM
I've got the install instructions for a 97, and I owe them to TDi guy too. PM me your email address and I'll send 'em to you and him both.
130Tdi
February 10th, 2009, 03:16 PM
Jim I was on that list as well please. Have an underdash system to put in the 110.

crowsnest31atmsndotcom
aosias
February 10th, 2009, 04:31 PM
Sweet! Thanks Jim.


I've got the install instructions for a 97, and I owe them to TDi guy too. PM me your email address and I'll send 'em to you and him both.
JimC
February 11th, 2009, 07:08 AM
We've got hardtop and other instructions on this site, so I'll assume for the time being that these don't count as manuals (which LR sells as opposed to gives away) and we'll just post these here on the site unless CvC or someone else takes umbrage:
aosias
February 11th, 2009, 10:38 AM
Thanks Jim! I'm one step closer to cold knees.
TDI Guy
February 11th, 2009, 12:46 PM
nice
JimC
February 11th, 2009, 02:23 PM
Sorry about the massive delay. The scanner tanked, so had to buy new, bought one for Mac, had to upgrade opsys etc.

Follow-up Post:

The handwriting on the wiring diagram is my efforts to decode the simple logic circuit. Turns out that there are two outputs from the computer that correspond to temperature values as read by the sensors. On my Tdi, I jumpered these leads with constant 12v and thus did a "manual override" of the temp safety system. So if my Tdi had started to overheat, I would have had to manually shut off the AC. I had a lot of fun with it.