ARB winch bumper with add ons

[130Tdi]

I have an ARB winch bumper with two Expedition Exchange recovery points (with backing plates), ARB clamp on CB antenna mount (easily removed), bottle opener, and two Hella 2000's with covers, billet aluminum hawse fairlead, high lift mounts, and 48' high lift. http://dividingcreekroverimports.com/yahoo_site_admin/assets/images/pickup1.60104323.jpg

$550

Thinking I'm just going to put the galvanized stock one back on.

[Hammertime]

I have an ARB winch bumper with two Expedition Exchange recovery points (with backing plates), ARB clamp on CB antenna mount (easily removed), bottle opener, and two Hella 2000's with covers, billet aluminum hawse fairlead, high lift mounts, and 48' high lift. http://dividingcreekroverimports.com/yahoo_site_admin/assets/images/pickup1.60104323.jpg

$550

Thinking I'm just going to put the galvanized stock one back on.

How much work is it to fit it to a 90?

[JimC]

Should be none, unless Doug did something weird.

[Abrooks]

How much work is it to fit it to a 90?It'll fit right on!

[130Tdi]

110 and 90 frame rail ends are the same. Bolts right on- but it is heavy. This was on Tony's white 90.

[Abrooks]

Trevor Griffiths put the hilift mounts on the bumper. They work very well.

[Rugbier]

I was just going to ask where the Hi Lift mounts came from..... ( karma )



( I guess Trevor will put my number on ignore ) :grin

[MC22958]

Any more close up pictures? What is the finish condition? Any scratches, dents? Thanks

[Roverlab]

( I guess Trevor will put my number on ignore ) :grin[/QUOTE]

Highly unlikely!

[130Tdi]

Any more close up pictures? What is the finish condition? Any scratches, dents? Thanks

Sure pm me your email and I'll send them. Very good condition overall.

[Abrooks]

Unless Doug's taken that 110 pickup wheeling really hard in the past few months, I can vouch for that bumpers' life. No hard hits (the trees always aimed for my fenders, not the bumper), all welds are good, minimal if any rust. It's been offroad, but never abused -- always had the mud hosed out, etc. I wouldn't hesitate to put it back on my truck.

[130Tdi]

pickup is the driveway queen. Tdi gets the hard work.

[Hammertime]

110 and 90 frame rail ends are the same. Bolts right on- but it is heavy. This was on Tony's white 90.
What does one of these things weigh? I guess I read it was the NAS 110 that used a different mounting kit.

Follow-up Post:

More pics please.

Hammertimetoo@aol.com

[JimC]

The only problem with the NAS 110 is the pushed-out grill. I have a bumper that was simply adapted by a couple small trims on the a couple flanges that interfered. The "adapter" is nothing more than a small extender. The bumper weighs I think 75-80 pounds and probably the same again for a winch.

[BEIS]

Is this bumper still avail? PM sent. Please let me know. I assume this will fit on the ol D110...

[130Tdi]

What does one of these things weigh? I guess I read it was the NAS 110 that used a different mounting kit.

Follow-up Post:

More pics please.

Hammertimetoo@aol.com

NAS 110 has a grill extension that sits out about 2 3/4 further (for its a/c system) than a 90 and uses an extension kit to keep the bumper clearance the same distance from the grill.

Follow-up Post:

The bumper weighs I think 75-80 pounds and probably the same again for a winch.
I would have guessed twice that weight Jim. I did a quick google and cant find the weight

[JimC]

I mean 150 or so for the total package. I can manhandle and even install an ARB (with no winch) by myself, and it must weigh less than a transfer case. If the bumper weighs much more than 100, I'd be surprised. I've got one sitting in my driveway, too bad I don't have a scale.

[Ren Ching]

Sorry for the delay on this. I weighed mine last year and it was about 95 pounds.

I mean 150 or so for the total package. I can manhandle and even install an ARB (with no winch) by myself, and it must weigh less than a transfer case. If the bumper weighs much more than 100, I'd be surprised. I've got one sitting in my driveway, too bad I don't have a scale.

[Hammertime]

I have an ARB winch bumper with two Expedition Exchange recovery points (with backing plates), ARB clamp on CB antenna mount (easily removed), bottle opener, and two Hella 2000's with covers, billet aluminum hawse fairlead, high lift mounts, and 48' high lift. http://dividingcreekroverimports.com/yahoo_site_admin/assets/images/pickup1.60104323.jpg

$550

Thinking I'm just going to put the galvanized stock one back on.
How is the High Lift jack attached, is it easily removed? I mean the brackets.

[Abrooks]

two threaded posts fit through holes in the jack, Wingnuts hold it in place. It's removable in just a few seconds but more importantly is held on securely.

[MC22958]

Do you have any pictures yet? Are you going to make it to any of the up-coming ROAV events here in Virginia? Thanks

[surf110]

The only problem with the NAS 110 is the pushed-out grill. I have a bumper that was simply adapted by a couple small trims on the a couple flanges that interfered. The "adapter" is nothing more than a small extender. The bumper weighs I think 75-80 pounds and probably the same again for a winch.


I have the adapter if anyone is interested. I decided not to use it.

[130Tdi]

Sorry been down on the farm outside of Lynchburg Va working on a new stable roof. Just got back to Md will take some shots and get them out tomorrow.

[Ren Ching]

BUMP for a great deal

Sorry been down on the farm outside of Lynchburg Va working on a new stable roof. Just got back to Md will take some shots and get them out tomorrow.

[Retrofit]

Doug, I would be all over this myself, if it wasn't for the fact that I purchased the tube bender, dies, steel to make my own.

Ho well ! But definitely a good deal to jump on.

Pat

[JMPDIV82]

Doug

I might be interested. I have a 97 (with AC) that need to something more stout then a brush guard.
Can you send me some closeups.

BTW I live in NOVA. So I can pick it up.

Cheers
Gregg

[130Tdi]

Bumper sold pending payment.

[cgalpin]

BTW I live in NOVA. So I can pick it up.

F that. Have Doug bring it over here and we can install it. :grin

[130Tdi]

Sold

Thanks D90 Source