PDA

View Full Version : Spring Cleaning - Defender Parts


woldd90
March 8th, 2009, 01:05 PM
Defender and Off-road parts



All items are plus shipping and are OBRO – (Or Best Reasonable Offer) – Trades Accepted




10 lbs PowerTank Sport, with mounting bracket - $225.00



1 Brand New Hella HID Matador style (Integrated Ballast) - $350.00



97 Front Brush Bar with Light Guards, bumper and Light Bar $300.00



4.0 Fan clutch with under 50K on it - $85.00



94/95 Defender Fan shroud, perfect $50.00



Defender Stainless Steel grill, Replaces factory grill - $95.00 (tab on the top that says Defender)



Rear Extremely HD Custom-Made Double Cardon Drive Shaft - $225.00 - No spacer needed, direct connect, 7 inches of Travel, may need a service/balancing. I replaced it only because I purchased a set of GBR from Cliff on this board.



Defender SW wind Deflectors - $30.00



Front Custom Extra Heavy Duty Drive Shaft - 7 inches of travel $165.00



Used Land Rover Tire Cover, top part has a few cracks, but repairable - $30.00



Brand New Engel 35/45 Slide Lock - $50.00



3/8x90' Super Winch cable - used about 5 times - $25.00



Rear Checker plate corner protectors, no hardware - $30.00



97 LR Best Top – has very small tear on the top, about 2 inches will have it fixed. One of the tabs on the rear driver’s side has been ripped. Windows are in good shape, comes with factory case. Been stored for over 4 years. $675.00.


(4) 33x12.5x16 Interco SSR – Purchased new in 2004, have about 6000 miles on them. They have been used on trails and rocks, have a bunch of small chunks missing lots of tread $550.00 (Currently mounted on D90 Alloys). Will sell with Alloys for $125 more. I also have two spares available and mounted with same tires but significantly less tread

Forward Facing Series truck Jump Seat Frames only - (2) One Left, One Right - $100.00 for the pair



(6) New Hella 4000 light covers $10.00 each



(4) Boost Wheels – Some Idiot spray painted them black, I started to remove the black paint with a pressure washer, was saving them to put on the ST, but probably wont - $450.00



19 Range Rover / Disco 2 lug nuts in good shape - $50.00



(2) Jate Rings, no hardware, one has a slight bend, holes still line up - $50.00


21. Winch Roller Fairlead - $25.00
22. Dash Plate $40.00 (was going to put this in my SW, probably won't)






Follow-up Post:

more pics

Follow-up Post:

two more

Ren Ching
March 8th, 2009, 02:02 PM
interested in power tank and jate rings

PM sent

thx
d

Bozman
March 8th, 2009, 02:10 PM
Interested in the Boost rims.

PM sent.

woldd90
March 8th, 2009, 03:25 PM
Powertank and Jate rings sold pending payment...

Follow-up Post:

Interested in the Boost rims.

PM sent.Pictures emailed...

JimC
March 8th, 2009, 03:40 PM
Anything you might want in part-trade for that work-light?

woldd90
March 8th, 2009, 04:50 PM
Anything you might want in part-trade for that work-light?
Sure, whatcha got?

Follow-up Post:

Interested in the Boost rims.

PM sent.Boost wheels sold pending payment.

JimC
March 8th, 2009, 05:26 PM
lots o' stuff, what kind of things do you like?

woldd90
March 8th, 2009, 06:35 PM
lots o' stuff, what kind of things do you like?
My wife told me our garages and back yard looks like Sanford and Son... So, I had to sell off a bunch of stuff

I like Tools, tool boxes and misc hard to find parts... I am open to ideas and options.

Here is what I am currenly looking for:

2 Front Matte Eyebrows already have 2 rears.
1 15x10 steel wheel
Rear ST rubber, to put in my SW
HID Headlight kit
97 headlight switch

JimC
March 8th, 2009, 06:50 PM
The HID headlight kit I have. I don't know exactly what it's worth though. That work light is a hella? I can't find it for sale anywhere in that style - where did you get that one?

woldd90
March 8th, 2009, 07:01 PM
The HID headlight kit I have. I don't know exactly what it's worth though. That work light is a hella? I can't find it for sale anywhere in that style - where did you get that one?Yes, it is Hella... It is a prototype. I have two, I plan to put one on my SW and this one was for my ST, but I have too many lights. It has the built in HID ballast and it is bright as hell. I gagged the price off the old style FF with the remote HID ballast.

JimC
March 8th, 2009, 07:31 PM
Let me get a pic of my kit and see what you think of it.

woldd90
March 8th, 2009, 08:22 PM
Let me get a pic of my kit and see what you think of it.Cool...

rover4x4
March 8th, 2009, 08:41 PM
damn dude, I need a power tank and could have gotten it from you at the Safari.......................

woldd90
March 8th, 2009, 10:20 PM
HID Work Light is SOLD.

Best4x4
March 9th, 2009, 12:00 AM
pm sent Scott

130Tdi
March 9th, 2009, 12:11 AM
interested in power tank and jate rings

PM sent

thx
d
almost an hour after Scott's initial post. You are slipping Ren.

Scott bring the sw door wind deflectors to Uwharrie/consider licked. I have been wanting to try a pair.

D90DRC
March 9th, 2009, 12:36 AM
Wind deflectors, What shape are they in ?

woldd90
March 9th, 2009, 07:48 AM
almost an hour after Scott's initial post. You are slipping Ren.

Scott bring the sw door wind deflectors to Uwharrie/consider licked. I have been wanting to try a pair.Done, consider them yours...

Follow-up Post:

Wind deflectors, What shape are they in ?They are an 8/10... there are two small chunks missing, but once installed, you can't see the missing pieces. There is a picture of them in the original post.

wadaman
March 9th, 2009, 09:19 AM
PM Sent re Tire Cover

woldd90
March 9th, 2009, 10:15 AM
Slide lock and Grill - Sold pending payment

Wind Deflectors - Licked

evilfij
March 9th, 2009, 12:01 PM
Why do I work and not search D-90 all day.

UGH!!!!

Seconds on grill.

John_Karlsson
March 10th, 2009, 05:35 PM
What are the maximum and minimum lengths of those driveshafts?

woldd90
March 10th, 2009, 06:08 PM
Why do I work and not search D-90 all day.

UGH!!!!

Seconds on grill.That is a good question... Sorry, but the grill is sold. :-)

Follow-up Post:

What are the maximum and minimum lengths of those driveshafts?John,

I will get the measurements for you... It may take a day or two as we are heading to the hospital, my wife will be having our 3rd child today or tomrorow.

Scott

John_Karlsson
March 11th, 2009, 06:46 AM
Scott,

That sounds like a good excuse, and it means I won't have to feel guilty about not crawling around in the mud with a measuring tape on this rainy day. Good luck with that project.

John

BradforD90
March 11th, 2009, 11:46 AM
interested in fairlead. PM sent

rlynch356
March 18th, 2009, 06:37 PM
boost wheels Sold?

John_Karlsson
March 21st, 2009, 03:41 PM
Scott,

Do you still have the drive shafts? I'm still interested, if you can get me the lengths.

Thanks!

John

crown14
March 23rd, 2009, 04:14 AM
Scott can you get me some pics of those SSRs?

woldd90
March 23rd, 2009, 02:25 PM
Scott can you get me some pics of those SSRs?Sure, drop me an email and I will send them over... swold (at) pbcx dot com.

Scott