Free Headliner from 1983 110

[MUDSUX]

Hey everyone,

I have a used headliner that came with my 110 if anyone wants it. I don't have the heart to throw it away. It comes in 3 big pieces (and some smaller trim pieces), a little dirty but can probably be steamed clean. No tears. It came already off the truck when I imported it and I actually prefer the bare roof. Please I do not want to ship it. I live in Orlando, Fl if you want to come by and pick it up. I also have numerous other parts that I need to get rid off, some from my Series III, the 110, and my Toyota FJ40 if you want to have a look. Thanks.

[cgalpin]

You sure do have some nice toys!

[rtcgb]

you wouldn't happen to have the A post trim pieces available would you?

[ipgregory]

There are a couple of A post trims on eBay right now from Roversland. Pricy though.....

[isleofbones]

Hi-
I know you mentioned that you don't want to ship your headliner; but, I'd be willing to pay for shipping and a reasonable price for the headliner itself. Provided, of course, that the liner is worth salvaging. I have a 1984 d-90. I have the front piece over the front seats: but, I am missing the back section. I imagine I can cut a 110 rear section to size. I might need the whole unit, however, if my color does not match yours. If you have any pix, and if a potential sale (instead of a giveaway) makes shipping more agreeable, please let me know.
Mike

[MUDSUX]

Ok here are some pics. The front piece is the dirtiest. The previous owner put some wheels and tires on them when he shipped me the truck. I think I have the middle and rear piece out of order. The last pic shows the trim pieces. The rear one is pretty soft but I am sure someone can trace out the shape on some thin wood and reapply the felt.

Follow-up Post:

I meant to say the rear TRIM piece is soft and floppy, not the rear main piece. Hope that helps.

[cgalpin]

If the felt side is good I image you could spray some resin or epoxy on the back side to stiffen it up again.

[isleofbones]

Hello Again-
Does anyone know if the liner would lend itself to cutting to fit a d-90 or are the joints are formed to fit? I'm still interested in purchase if you are willing to consider shipping. I probably don't need the front section since I already have that component... But, it probably makes sense to keep all of the pieces together.
Thanks,
Mike

[130Tdi]

you wouldn't happen to have the A post trim pieces available would you?
I have those from my 83 somewhere around here very good condition if I recall correctly.

[cgalpin]

Hello Again-
Does anyone know if the liner would lend itself to cutting to fit a d-90 or are the joints are formed to fit?
Mike I'll check when I get back home next weekend. I have the front section off of mine right now so I can look at the leading edge of the middle section and let you know.

[MUDSUX]

Hey Mike,

Let me know if it will work for you. PM me if you're still interested.

[Abrooks]

Those should clean up with some carpet cleaner. I had to pull the rear piece (over the door) today to install a ladder and while it was out took some generic carpet spray to it. Huge difference.

[cgalpin]

So is the leading edge indented or not? Mike is asking if he can cut a 110 headliner down to size to use in a D90 and have the joints look "proper"

[isleofbones]

Sent pm. Curious if I can make rear piece work for a d-90 if I cut it?

Mike