PDA

View Full Version : Serious Garage Cleaning


woldd90
July 11th, 2009, 09:01 PM
All items are plus shipping and are OBRO – (Or Best Reasonable Offer)


1. 1 Brand New Hella HID Matador Fog light style (Integrated Ballast) - $380.00



2. 97 D90 Fan Clutch – Removed with 49K on the truck - $50.00



3. ARB Brushbar, complete with turn signals, needs bulbs - $485.00



4. Pair (2) Newest style HID Hella 4000’s, they were on the truck but never hooked up, complete with wiring harness - $825.00 Shipped (They also have the lockable nuts with key)



5. Rockware Frame Sliders - $245.00



6. Rockware Cat Guard - $275.00



7. Rockware Belly Pan - $245.00 (Covers Transfer case, connects to the Frame Sliders with tabs, tabs not included)



8. Basically new Pair (2) Hella 4000 Euro with White covers and pigtail, never connected - $200.00 Shipped (Has city light)



9. Basically new Pair (2) Hella 4000 Fog with White covers and pigtail, never connected - $200.00 Shipped



10. (4) 33x12.5x16 Interco SSR – Purchased new in 2004, have about 6000 miles on them. They have been used on trails and rocks, have a bunch of small chunks missing lots of tread $550.00 (Currently mounted on D90 Alloys) Will sell with Alloys for $125 more. I also have two spares available and mounted with same tires but significantly less tread



11. Grill, goes behind the Factory Grill, comes on the 110, two small cuts, at the bottom, to be able to run lights - $45.00



12. Series Forward Facing Jump Seat Frames only - (2) One Left, One Right - $100.00 for the pair



13. Used Warn 10K winch, with controller and Synthetic line (Winch works fine, not the prettiest, Amsteel line should be replaced at some point) $500.00



14. Rockware Rear Pinion Guard - $35.00



15. Matec Sliders – Not perfect, have some rust - $200.00



16. Southdown Trackrod and Diff skid plate, complete – Stainless - $225.00



17. Brown Church/RN Custom Stainless Steel rack with Jerry can holder and Ladder - $600.00 (This can be painted, powder coated or etc, it mounts and un-mounts in less then 15 mins and no holes need to be drilled)



18. Defender Thule Rack, complete with feet, with Kayak Rack and pads (faded) - $250.00



19. Aftermarket Tan Sheepskin seat covers (pair) - $150.00



20. Warn winch controller - $25.00



21. Buck’s Vent Covers Faded Black Anodized Aluminum $85.00



22. Safari Gard High Lift mount, drilled for both SW or ST use - $60.00



23. Wrangler Northwest Parts Dual Battery Manager, with Tray - $350.00



I will post most of the pictures tomorrow or email me at swold(at) pbcx dot com, and I will send you them.

Green Blood
July 11th, 2009, 09:05 PM
Scott:

I'll take the winch controller is it works for an M8000. I'll PM you for details or I may still have your email

Cheers,

CARL

evilfij
July 11th, 2009, 09:11 PM
Scott:

I'll take the winch controller is it works for an M8000. I'll PM you for details or I may still have your email

Cheers,

CARL

Out vultured.

dave_lucas
July 11th, 2009, 10:40 PM
Sent you a PM on the frame sliders.

BECFA
July 12th, 2009, 12:16 AM
PM sent on the SG hilift mount & Dual batt stuff

Scott

d90dan
July 12th, 2009, 10:19 AM
Email sent

jumping jellyfish
July 12th, 2009, 03:12 PM
PM sent

vesparover
July 12th, 2009, 05:43 PM
Pm sent on arb bumper.

woldd90
July 12th, 2009, 09:31 PM
Frame Sliders Sold - Thanks Dave
Winch controller Sold - Thanks Carl

rover4x4
July 12th, 2009, 09:55 PM
500 for the HID 4k's I know where you got the Barri Nuts. I need something for the Classics Rockware.

JimC
July 12th, 2009, 11:35 PM
Phillip - Scott still has a bunch of other items that you forgot to low-ball.

Big D
July 13th, 2009, 10:42 AM
send me a pick of the roof rack and the dimensions. Iam interested in it and maybe could pick it up next week.

woldd90
July 13th, 2009, 04:16 PM
Seat covers SOLD, thanks Dan.

shawnpalmer
July 13th, 2009, 04:53 PM
Scott, give me a call about skid plates

Campbell
July 15th, 2009, 03:13 PM
PM sent on Viscous Fan

JBOD77
July 16th, 2009, 08:51 AM
Please post pics of ARB for serious consideration
Thanks you

jvelador
July 17th, 2009, 01:38 AM
Can you post/send me pics of the Serie forward-facing seat frames, please?

woldd90
July 17th, 2009, 08:43 PM
I will get pictures of everything up tomorrow afternoon... This has been a rough week, thanks for everyone's patience.

Scott

enjoi1968
July 30th, 2009, 08:19 AM
ttt for scott.

snowkistdynasty
August 19th, 2009, 12:27 AM
Do you still have the forward seat frames?

ipgregory
August 19th, 2009, 03:39 AM
Are the sliders still available and do you have any pictures?

TDI Guy
August 19th, 2009, 08:25 PM
do you still have the pinion guard?

d90boy
September 22nd, 2009, 03:22 PM
great interest in #18. do you have photos? and it is/they still for sale?

NCMerriman
September 23rd, 2009, 02:30 PM
Interested in ARB fender do you have a picture?