PDA

View Full Version : Defender Truck cab external cage

Jase
September 27th, 2009, 12:04 AM
Safety Devices weld in cage for Defender with a truck cab. Cage is assembled and powder coated black. Great condition with only a scratch or two. Mounts to outriggers and frame via weld on plates. I don't have the plates but they are simple in design. They could be easily fab'd or acquired from SD. SD site depicts the cage and six frame plates. Was on a 110 pick-up. $1000

See the Safety Device site for info: RBL139 6SSS Defender External Weld-in kit.
Jase
October 2nd, 2009, 08:42 PM
Cage pictured on a 110 - actual cage (don't mind the RWLs)

Interesting parts trades are also welcome.
Jase
April 6th, 2010, 11:00 PM
Trying to move the cage out of my garage. $500 or best offer
rovertrader
April 7th, 2010, 07:00 AM
I'll take it IF we can sort reasonable shipping.
evilfij
April 7th, 2010, 10:53 AM
Seconds.
revor
April 7th, 2010, 10:57 AM
thirds!
Dang my licker is too slow..
NashvilleRover
April 7th, 2010, 09:26 PM
Good on you Dale.
Dang, why did you take it off the 110 pick up? Looked great!
D
revor
April 7th, 2010, 09:38 PM
No kidding, that's a great looking truck.. It's one of my screen savers....
MUDSUX
April 7th, 2010, 09:46 PM
Keith, just saw your mug in the Land Rover Owner International mag. Nice!
Jase
April 7th, 2010, 11:03 PM
thirds!
Dang my licker is too slow..

Thanks to all for the responses and comments.

Here is the list of people in order of response to the posting, I'll work down the list in order. I'll also post once a sale is confirmed.
1. email from posting
2. rovertrader
3. evilfij
4. revor
5. Others

I removed to add a NAS front (with correct supports) and a custom rear DOM hoop. The NAS front gave me the ability to play around with a full NAS "like" cage. Probably would not do that again.
rovertrader
April 8th, 2010, 07:12 AM
Pls pm me if the email contact fails to deliver- Thanks
MUDSUX
April 8th, 2010, 07:12 AM
Jase,

What size tires and lift is on that bad baby? The NAS front looks awesome.
revor
April 9th, 2010, 09:40 AM
Keith, just saw your mug in the Land Rover Owner International mag. Nice!

I'm Famous!!! Well kinda.. It was a lot of fun but a very long three days of interviews and pics'. I hope to be in the mag again in the October or November issue with my next build if I can ever get it stated.
imeek
April 9th, 2010, 09:52 AM
That is a damn sexy truck!!!
roverup
April 12th, 2010, 09:18 AM
Has the cage been sold ?

Thanks
rovertrader
April 12th, 2010, 03:39 PM
I'm assuming it has since I haven't heard anything, but keep hoping to hear otherwise...
revor
April 12th, 2010, 04:16 PM
I'm still poised and ready to pounce.. Dale and Ron are before me in line though.
Jase
April 12th, 2010, 05:29 PM
I'm assuming it has since I haven't heard anything, but keep hoping to hear otherwise...

Sent you a PM last night. I'll resend it.
Cube II
April 12th, 2010, 05:45 PM
OT, but what' the setup front?
:)
Jase
April 12th, 2010, 05:47 PM
Jase,

What size tires and lift is on that bad baby? The NAS front looks awesome.

Thanks.

The tires are 315/75/16s, old style BGF MTs with hub centric spaces. The truck had (I sold it) a 3-link front with external hoops and about 3" of lift via a set of OME springs. I forget the model numbers but the front were an older design; they were longer than most OME springs and had a 180 lb/in rate. The front moved well.
bjf
April 12th, 2010, 06:34 PM
It looked awesome as a NAS style truck. What did you make the cage out of? Is it coated in something?