PDA

View Full Version : Parting out 1993 NAS 110 bits


ECR
October 14th, 2009, 09:29 AM
Parting out the left overs from 1993 NAS 110 rebuild that has rust issues. Some good parts though. Email with needs at
info@eastcoastrover.com

Things like headliners and such were all toast (this truck was rough), but if you need a wiring harness or something we may have it. The doors are rusty, but do have all the windows and such so you can build up new doors. So all the stuff people usually want (doors, cage, etc) are all rusted, but if you have oddball needs, like roof sides or such, let us know. Most of the good stuff got re-used in the rebuild, but there seems to be a lot of bits left over and we have too much of this stuff, so we are selling it this time.

dimcon
October 14th, 2009, 10:18 AM
Do you have any rear harnesses available. I really need one for a 90, but could use a 110 I guess if there no major differences other than length.

ECR
October 14th, 2009, 10:30 AM
If you have a '94 90 the 110 one may work (not sure never tried that).
Fuel pump connections and such are different on the 110 rear harness as well. I don't think the 110 rear harness would be a good way to go.

evilfij
October 14th, 2009, 10:52 AM
Can I buy the whole thing?

dimcon
October 14th, 2009, 10:52 AM
Is a 94, but going to 200 tdi so fuel pump doesn't matter. Really looking for the connectors where it plugs in to the main harness up front. If the rear light connections are different then I agree it wouldn't work. I like trying to save a buck, and don't mind a little work in exchange.

ECR
October 14th, 2009, 10:56 AM
Can I buy the whole thing?

Yes... looking to corner the market? :)

evilfij
October 14th, 2009, 11:26 AM
PLease send me pics and price to my email.

Ron

cgalpin
October 14th, 2009, 11:37 AM
Mike I'd be interested in a old 93 110 parts truck if you have them in the future to use for rebuilding Janey. Preferably one with a salvageable chassis.

rayfi
October 14th, 2009, 11:39 PM
I need the dog leg where the mid doors latch on both sides of the tub if you have them?

roverup
October 16th, 2009, 07:15 PM
I need the elec socket which the hazard switch plugs into, would need 6 to 12 inches of the wiring to splice to.

Mark

ECR
October 16th, 2009, 08:22 PM
I need the elec socket which the hazard switch plugs into, would need 6 to 12 inches of the wiring to splice to.

Mark

Sorry, main harness is being used in the restoration.