PDA

View Full Version : Torx Tool


Matt Klapmust
June 2nd, 2004, 07:32 PM
Can someone tell me what size Torx screwdriver I need to remove the safari cage? The only ones I found were at Home Depot and the largest size wasn't large enough.

If you also know where to find the correct size, the info would be much appreciated.

Thanks,
Matt

javelinadave
June 2nd, 2004, 07:44 PM
I think it comes apart with an allen wrench, not torx but I may be wrong.

TDI Guy
June 2nd, 2004, 07:45 PM
its a torx

TDI Guy
June 2nd, 2004, 07:46 PM
I will have to check the size it might be a T45

Matt Klapmust
June 2nd, 2004, 07:57 PM
Yeah, I found a site that said the same, either a 45 or 50. Any retail place that might have this bit? Would hate to have to blow S&H on a $2.00 piece off the internet.

mattdh
June 2nd, 2004, 09:00 PM
try a auto parts store like napa or auto zone

Trigger
June 2nd, 2004, 09:21 PM
I found mine at PepBoys. T-45 I believe for like $3. They let me take a couple out to the lot to try them out to find the one I needed.

Matt Klapmust
June 2nd, 2004, 10:15 PM
Cool. Thanks for the input, fellas.

dave_lucas
June 2nd, 2004, 10:27 PM
I just went out to the shop and checked and it is a T50.