86 D90 Brakes, Specs?

[Larns]

Guy's
Dose anyone know the spec's on british army 86 D90 braking system?
In particular I'm interested in weather it had a proportioning valve, an if it did
what was the cracking pressure of it.
I'm changing to four wheel disc and need to know if one's required(I'm starting
from a bare chassis and have no idea what was originaly on it).

Cheers Larns

[TDI Guy]

you can just set it up like an NAS truck. you will need the valve, master cylinder and the brake pipes. along with the disc brake rear axle of cource.

[Larns]

you can just set it up like an NAS truck. you will need the valve, master cylinder and the brake pipes. along with the disc brake rear axle of cource.

Which valve are you talking about? If it's the proportioning valve then what model? there's quite a few different valves depending on cracking pressure requirements.

Cheers Larns

[TDI Guy]

I used MC #STC441 and valve #NTC8836. I then used all NAS brake pipes. they are all the same from 94-97

[Larns]

Cheers
I'll give those No's ago at the local dealer.