Front Outer Fender Template

[TDI Guy]

Help. Does anyone have a NAS front fender that is not on their truck so they can trace me a template to cutout the roll cage hole? IF someone can do this, I would gladly send you a stamp, paper, whatever...


Randy

[Glenn_Guinto]

Randy,

Can't you take measurements from an actual truck? I'd be glad to volunteer if you can. Let me know. :grin

[Trigger]

Help. Does anyone have a NAS front fender that is not on their truck so they can trace me a template to cutout the roll cage hole? IF someone can do this, I would gladly send you a stamp, paper, whatever...
I will this weekend when I finally replace both outers after my accident from a couple months ago. If you still need it after this weekend, let me know.

Tony

[TDI Guy]

Tony that would be great. I will shoot you an email.. Thanks Glenn but we would have to unbolt the front Cage which is only 8 bolts and lift it up a few inches. I would understand if you did not want to do this.

[aschoent]

I just replaced my two fronts with tdi take offs a month ago. I should still have the templates I used to cut the holes for the NAS cage. I will look in the shop tonight. I used some card board, so I guess I could scan and e-mail? What do you think? I will also measure the distances from the edges of the fenders.

-Andy

[TDI Guy]

That might work. shoot me an email off line.

[Glenn_Guinto]

No problem Randy.... I see now. Well, if push comes to shove and you need them, let me know..offer still stands... :grin

[aschoent]

Hi Randy,

I e-mailed the template to you, but I thought I would post it as well, so that if it came up again, it could be found in a search.

-Andy

[TDI Guy]

Thanks Andy. That works great.


Randy