PDA

View Full Version : Need ARB locker install manual

dave_lucas
June 14th, 2004, 10:15 AM
Does anyone have an extra ARB air locker install manual that they can scan or send me?

I just picked up a 2 that did not come with the manual and I would like to make sure I wire them correctly.

Thanks

Dave
DJ Menasco
June 14th, 2004, 11:08 AM
Here ya go!


http://www.dynamics.co.uk/landrover/ARB%20Air%20Locker%20Operating%20and%20Service%20M anual.pdf


Good luck with the install!

DJ

Edit

Oops. Sorry, that was only the operating manual.

DJ
vianna_andre
January 6th, 2006, 08:15 AM
Does anyone have an extra ARB air locker install manual that they can scan or send me?

I don't download from http://www.dynamics.co.uk/landrover...%20M anual.pdf

Thanks

Andre
Tdi Lurker
January 6th, 2006, 12:50 PM
Does anyone have an extra ARB air locker install manual that they can scan or send me?

I just picked up a 2 that did not come with the manual and I would like to make sure I wire them correctly.

Thanks

Dave


i should have what you need ......is it the rover diff or the salisbury one you need......give me an address and i will see what i can find....

Big Gord
MonLand
December 4th, 2006, 06:05 PM
i should have what you need ......is it the rover diff or the salisbury one you need......give me an address and i will see what i can find....

Big Gord

I would love the manual to install an ARB locket in for the front diff of my '95 D90. That's a rover diff I believe.
evilfij
December 5th, 2006, 08:33 AM
http://www.d-90.com/tech/arb.html
Tdi Lurker
December 5th, 2006, 08:51 AM
I would love the manual to install an ARB locket in for the front diff of my '95 D90. That's a rover diff I believe.

Sorry mine are long gone....or at least very well hid since my move to my new shop


Gord
MonLand
December 5th, 2006, 09:24 AM
http://www.d-90.com/tech/arb.html
Yep, I saw this. But the "front ARB install" part is still not updated! ;-)
evilfij
December 5th, 2006, 09:30 AM
It is the same as the rear. Just pull the axles out and pull the pumpkin. You just need circlip pliars to get the drive flange off the cv. If you can't get the pumpkin out I would not consider trying to set up an ARB.
btate
December 5th, 2006, 01:29 PM
Do you need directions for the compressor wiring or the ARB install?
MonLand
December 5th, 2006, 01:38 PM
Do you need directions for the compressor wiring or the ARB install?
I take that question for me then! :-)
- ARB install: the official install guide or anything beyond what is described on the D-90 Tech section would be nice
- the ARB compressor is already installed (rear locker in place and working), so unless there is anything I need to know about the wiring, I should be all set (electricity and air stuff I can manage! :-) ). I did read that "by default" the front locker can not be engaged if the rear locker is not.... I assume that is only true if you use the arb wiring harness/kit. (and I guess it is because the 12V that comes from the rear locker relay is also the 12V used as the input for the front locker relay.... In which case, bring in a 12V directly to the front locker relay would be extremely easy).

However, if you have leads on how to get cheap solenoid for the air setup that would work with the stock (?) ARB setup, that would be cool! :) I actually did not open the ARB locker box yet.... I have no idea what's in it (beside the locker itself).
btate
December 5th, 2006, 02:39 PM
I just had GBR put mine in the 3rds, I have the manual for the compressor wiring. But, didn't see any other manuals.

What about asking Bill at GBR for a fax on the instructions?
MonLand
December 5th, 2006, 03:33 PM
What about asking Bill at GBR for a fax on the instructions?

Well... I got my locker from ARB directly (long story short, won a discount coupon that made it cheaper than reseller can get... locker has been in the box for the last three years now....), so I don't think it would be fair for me to ask Bill for the instructions..... [But I can provide you with a fax number if you want to call him! :-)]
mhansen
December 6th, 2006, 10:05 AM
The ARB Locker install manual does not have any instructions on how to set up the diff assembly. It states to refer to the Land Rover Service Manual for installation.

The ARB Manual shows how to run the Air Lines, Tap the Case, Install the Banjo Air Fitting, etc.

I could copy the manual and fax it to you if you need it, but be forwarned it does not cover diff set up!