NAS light Connector Part#

[FlaD90]

Can anyone tell me what is the part# for these connectors on the rear lights?

[ECR]

Its an "econo-seal" 2 or 3 way connector.
There is no part # from Rover, but you can get them through other wiring sources. Autosparks in the UK is a good source for small numbers of them.

[FlaD90]

Thank you kindly Mike...

[evilfij]

If you need the one on the harness, not the bulb holder, both AB and RN both sell repair kits with just that connector.

[JimC]

You can get them from Ballenger motorsports in the US, but their customer service sucks. Best order from the UK. Price is high either way, but you gotta have 'em for a nice install.

I used the more-common-in-the-us weatherpack connectors on the 90, but the harness pigtails were already messed up, so I had to cut them off anyway.

[chris snell]

What about these?

http://www.mouser.com/ProductDetail/Tyco-Electronics-AMP/174355-7/?qs=sGAEpiMZZMvvAo%252bip5liN289S041V2jT

http://www.mouser.com/Interconnects/Automotive-Connectors/_/N-1ehb5?Keyword=econoseal&No=25&FS=True

If one of these would work, Mouser is a great company to deal with.

[diesel_jim]

My local autofactor place here (UK) does them, so shout if you can't get any stateside.