Davis
March 31st, 2010, 10:13 AM
OME CALR2 bushings. These are to correct the castor angle for 2-3" lifts--these are new in bag. There has been some discussion on CALR1 versus CALR2 and which models they go with. The CALR1 is a 38mm wide kit and the CALR2 is a 44mm wide kit--just measure your front control arm width to determine which you have. My 94 D90 has 44mm wide but I am not sure all are the same.
The intent of these bushings are to correct the angle of the front pinion to releave the stresses caused by lifting the truck and to return the steering geometry.
$68 plus shipping.
The intent of these bushings are to correct the angle of the front pinion to releave the stresses caused by lifting the truck and to return the steering geometry.
$68 plus shipping.