PDA

View Full Version : 302,NP435,Atlas transer case

o2batsea
October 15th, 2010, 06:21 AM
Finally finalized drive train for hybrid. Transmission sorta fell out of the sky into my lap so I can transfer the funding for the trans into an atlas transfer case. Need a destructo party to happen soon.
Can't decide on a blower for the 302 or a fancy winch bumper....
Ren Ching
October 15th, 2010, 11:22 AM
Doubt you will need the blower. order a winch bumper from pangolin 4x4 right now and it might be done by the time you are back on the road.

Finally finalized drive train for hybrid. Transmission sorta fell out of the sky into my lap so I can transfer the funding for the trans into an atlas transfer case. Need a destructo party to happen soon.
Can't decide on a blower for the 302 or a fancy winch bumper....
Viggen
November 15th, 2010, 10:06 AM
Finally finalized drive train for hybrid. Transmission sorta fell out of the sky into my lap so I can transfer the funding for the trans into an atlas transfer case. Need a destructo party to happen soon.
Can't decide on a blower for the 302 or a fancy winch bumper....

Curious but did you center the rear axle or are you going to run an angled rear shaft? If its angled, by how much?
supercharged67gt
November 15th, 2010, 12:03 PM
good choice its what im doing in my sereis iia 88" right now

http://i59.photobucket.com/albums/g296/supercharged67gt/Series%20II/Trannymount-001.jpg

edit: dunno why img tag wont post pic =(
Viggen
November 15th, 2010, 12:12 PM
good choice its what im doing in my sereis iia 88" right now

http://i59.photobucket.com/albums/g296/supercharged67gt/Series%20II/Trannymount-001.jpg

edit: dunno why img tag wont post pic =(

What axles are you running? I can see youre probably running American ones since the drop is on the drivers side.
supercharged67gt
November 15th, 2010, 01:32 PM
dana 44 front 9" rear 4.11 ratio
1962siia88
November 20th, 2010, 08:29 PM
Hey supercharged

Saw your build thread over on pirate. Looks really great so far. One thing I couldn't figure out is how your rear shock towers will fit with the tub on the truck. Are you going to chop wholes in the tub? Sorry to hijack!

Daniel
orionpco
November 20th, 2010, 10:51 PM
some one post a link to his build. im very interested in his suspension set up
ArmyRover
November 21st, 2010, 08:58 AM
http://www.pirate4x4.com/forum/showthread.php?t=913121