Nato steel wheels with 2" backspacing

[Shane@EVS]

I have a set of 5 Nato/wolf rims that have been reversed to have 2"
of backspacing for a wider track width.
They are powdercoated white but have a few chips in the coating around the edge from getting kicked around ther garage. They have been mounted and used for rolling around a project but decided on something else so who wants them? $500 obo
located in Redding CA, 96003

[Shane@EVS]

bump

[Treuwer]

What size are they? I'm interested if they're 16's... but I live across the country.

[Shane@EVS]

they are 16x6.5

[tobit3]

What do you mean by reversed. I may be very interested, but I am unclear on their offset. Are they just steel Nato/Wolf wheels or have they been modified.

[Shane@EVS]

the centers of the wheels were cut out and rewelded in(by a custom wheel shop).
They are nato/wolf rims and still have the same rim and wheel center only with a different offset.
They now have 2" of baskspacing(measured from the inner most edge of the rim to the wheel mounting surface(WMS)
The stock backspacing on the nato wheels is about 4.25". So these wheels will stick out about 2.25" farther than stock