Looking for HD driveshafts, radius arms, and more

[chrisvonc]

Hey gang, with everyone stripping down built up trucks all the time, if anyone has a line on some of these items laying around or will be pulling off, I am needing to replace some stuff wearing out on my D90. I will be hitting MAR as a passenger so if you are going, we can definatly meet up to save shipping hassles.

Really need:
- F&R HD driveshafts that will accomidate a 3" lift or good condition stock driveshafts that I can just swap out my bad ones with to get by on.

Would be nice to find if possible:
- HD rear axles
- Extended front brake lines

Post here or shot me an email or PM.

Thanks!

[chrisvonc]

bumpity bump...
Anyone have a set of really good shape stock driveshafts then?

[JimC]

I have a set that isnt beat up from wheeling. I would replace the UJ's as a preventative measure since they've got a lot of miles on them, but they were doing great on my truck until I started disassembling it. Make an offer?

[DJ Menasco]

bumpity bump...
Anyone have a set of really good shape stock driveshafts then?

I have a stock front driveshaft if you're interested? It had about 80K miles put on it.

DJ

[m.olivares]

hey chris,
i have a set of RTE 3" castor corrected arms that have been lenghtened .5", with new bushings if your interested.

[chrisvonc]

Marc, thank you, yes I am interested. Would you please email or PM me with what you are looking to get for them.

DJ & Jim, thank you guys, I think that I will have to just bit the bullet and buy new HD one's. I could get away with the stock ones with the 2" OMEs but now that I am at 3", the more I think about it, I should just go proper with the HD ones now.

[chrisvonc]

Thank you to everyone who PM'ed/emailed me regarding the driveshafts they have. With my current situation, I only have very limited time available to me to schedule work time when I can get down to the house so, I really need to find a set of driveshafts I dont have to repair, and can just throw on and be running again.

Again, thank you to those who contacted me, it is very much appriciated.

[BradforD90]

Check out www.tntlr.com (http://www.tntlr.com) they have alot of used driveshafts in pretty good shape.

[JimC]

CVC -

I've got two used NAS driveshafts read to go in a box if you want them. They have nicks in them from cutting off the nuts, but other than that they entirely serviceable. I'm not trying to get rich off them, so make me an offer, I'll send them out UPS 2nd day, and you'll have them before Friday.

[chrisvonc]

Jim, cool.. let me shoot you a PM in a bit when I get home. Thanks!