aftermarket temp guage options

[draaronr]

Mine isn't reading correctly. I have replaced the temp sender but that hasn't helped. So I assume it must be the guage, any options out there.

[Mike Hippert]

I think everyone goes with the VDO's as they look the closest to stock. You can get them at

http://www.egauges.com/

And a little info on them here

http://www.d-90.com/faq/Interior/IntInstruments.html#Temp

[Doug]

I went with an aftermarket analog gauge and sender. Basically a really long thermometer. Found it at Jegs.com. Not pretty, but I get exact degree readings from the hot side of the radiator.

[loykd]

Aaron, if you can wait a month or so, I'm going to be putting in VDO gauges and you can have my stocker.

[draaronr]

Thanks mike I think I will go with that route. I appreciate it Ken I just need to know the temp I just did a rebuild on the motor, with a bunch of parts from RPI so last thing I want is a meltdown.

[Buckon37s]

I don't know if it was just mine but the stock temp guage read nothing close to the actual temp. I think it is a good idea to upgrade to a decent sender and guage.

[draaronr]

Mike I contacted e guages and the no longer have the part # 323-422 which is a 5/8-18unf, all they have is 1/8 27NPT. do you know where to find an adapter.

[Mike Hippert]

Aaron, check out this post by Daves S.

http://www.d-90.com/forum/showpost.php?p=26090&postcount=26