PDA

View Full Version : 110 rear diff protection (Salisbury diff guards)

dave_lucas
September 28th, 2005, 03:06 PM
I am looking for a few people to test a Salisbury rear cover I am getting ready to release. If you are interested in testing it and providing feedback let me know and I will make it worth your time/effort

Testing needs to be completed ASAP!

Thanks,

Dave Lucas
www.slickrockfabrication.com
dave_lucas@comcast.net
jabber
September 28th, 2005, 09:41 PM
If you have a sals that'll fit my new disco too... I'd be happy to test it out. :grin
dave_lucas
September 28th, 2005, 11:30 PM
If you have a sals that'll fit my new disco too... I'd be happy to test it out. :grin

Yup there is one sitting here :)

:nono

But it is going into my next rover :cool:
JBurt
September 29th, 2005, 09:35 AM
Sorry to hijack, but Mike, new Disco???
c2sox
October 1st, 2005, 10:41 AM
Hey Dave,

I'd be interested.

Contact me at c2sox@yahoo.com

Thanks,
Al
GliderKing
October 1st, 2005, 03:08 PM
I would be interested too for my 110.

Bob
dave_lucas
October 1st, 2005, 04:44 PM
Al, Bob,

I sent you both an email with the details.

Thanks,

Dave Lucas
COSteve
October 5th, 2005, 02:15 PM
Dave, If you need a local 110 Sals as a fitting rescource, let me know! COSteve
kellymoe
October 6th, 2005, 10:56 AM
I am located in Burbank California. I have a Sals on my 130. If you still need test vehicles please let me know.
dave_lucas
October 12th, 2005, 08:41 PM
Hello everyone,

Thanks to all of the people that have volunteered to try the covers out and provide feedback. (D90, NAS 110, UK 110, 130 and even a Discovery)

Hopefully I will have the feedback wrapped up and pricing finalized in the next few weeks.

Sneak Peak :cool:
http://www.slickrockfabrication.com/content/Products/Misc/110cover.htm

Dave Lucas
www.slickrockfabrication.com
Wookie110
October 13th, 2005, 06:39 PM
I would be interested as well for my 110!!!
Monkeyboy
October 15th, 2005, 07:26 PM
V. Nice Dave!

I'll keep it in mind.
pendy
October 24th, 2005, 11:59 PM
Those are Blue torch fab covers, aren't they?
dave_lucas
October 25th, 2005, 09:08 AM
Howdy Pendy,

They are similar to the BTF and others that are on the market but mine offer a few little niceties that others do not.

1. My covers include the appropriate Metric hardware necessary to install the cover where others do not send bolts or send Standard thread bolts.

2. I grind the external welds where others cut corners and do not grind their welds. While this is not necessary from a structural/ mechanical standpoint I feel that the finished product looks better and is worth the extra time and effort opposed to saving a few dollars.

3. The covers receive my standard powder coating treatment. First the covers are sand blasted, then they go through a phosphate wash and finally they receive a baked on semi gloss powder coat finish.

I feel confident that customers will see the additional value over the other covers on the market.

Thanks,

Dave