PDA

View Full Version : Scorpion Racing Rear Wheel Carrier

JohnC
February 9th, 2006, 12:03 PM
Now in stock:

Rear Wheel Carrier for Defenders with swing away tailgate (http://dev1.boomersdomain.com/cgi-bin/store_4x4ag_2/00169.html) or drop down tailgate (http://dev1.boomersdomain.com/cgi-bin/store_4x4ag_2/00170.html).

Both carriers have a hi-lift holder and will not accomodate spares larger than 32" with jack in place.

4x4 Adventure Gear
973-342-3520
chrisvonc
February 23rd, 2006, 04:50 PM
How did I miss thins one? John will these work on Wagons and ones with the LRNA roof rack and ladders?
rover4x4
February 23rd, 2006, 06:46 PM
yeah any photos of it mounted?
chrisvonc
February 23rd, 2006, 07:13 PM
I found 2 on John C's site. I need to look at the upper corner where the ladder attaches and see if this will work.
JohnC
February 27th, 2006, 11:05 AM
Sorry for the delay, here (http://gallery.4x4ag.com/thumbnails.php?album=2&page=1) are some pics of the carrier mounted on a customers 90 here in the US.
chrisvonc
February 27th, 2006, 11:20 AM
Yeah, doesnt look like its going to work with a NAS roof rack/ladder system.
Gore Ranger
March 10th, 2006, 10:03 AM
Can you mount a 35 on there? Also, if you have a big heavy tire and rim on there, the truck is not going to sit to one side, is it?
JohnC
March 10th, 2006, 10:48 AM
Can you mount a 35 on there? Also, if you have a big heavy tire and rim on there, the truck is not going to sit to one side, is it?
As mentioned on our website it will accomodate up to a 32" tire. If you're running OME unmatched springs your truck is already leaning to one side so don't worry about it. j/k

No, it won't lean.
steved90
March 10th, 2006, 11:10 AM
will this work with an nas ladder??

maybe without mounting the hilift??
JohnC
March 10th, 2006, 01:37 PM
Actually, it will fit a 35 tire if you do not use the hi-lift.

Steven, I'll check to make sure it will fit with a NAS ladder.
chrisvonc
March 10th, 2006, 01:46 PM
I was going to say, I was looking at my ladder mount and it might work. I've seen the ST with the rack system, if the SR one uses the same method, it should work I am thinking.
souza
May 5th, 2006, 08:09 AM
Ever get any confirmation of this working with the NAS rack ladder?
JohnC
May 5th, 2006, 08:59 AM
Ever get any confirmation of this working with the NAS rack ladder?
Dave, no we ia haven't.

We haven't found anyone in the area that could test it for us.
rover4x4
May 5th, 2006, 08:21 PM
I hate to be limited to 32" will it handle a 255/85? and the high lift. I like the integrated high lift feature but hate to only have room for 32"