Replacing the OEM Spedometer with a VDO Programmable Spedometer

by Clarke Williams
Yeti Vehicle Specialties, Inc
(541) 266-0300

Step 1 - Remove stock Land Rover speedometer

Step 2 - Replace with VDO 4" speedometer

Replace the speedo with a VDO 4" electronic programmable speedo with reset odometer. (use either #437-155 with a limit of 120 MPH or #437-156 with a limit of 130 kph)

#437-155

Step 3 - Wire the VDO speedometer

Wire VDO according to instructions:

Run power and ground for speedo and two lamps

Run the two wires from the '97 OEM Land Rover sender mounted in the LT-230 transfer case (if installing in a '94 or '95, mount a '97 Land Rover sender (LR #AMR 1253) and replace the stock speedometer cable with the wires from the sender)

Step 4 - Close up the dash

A good place to get the VDO instruments (good prices, fast delivery) is http://www.egauges.com